Installing The Fireplace - Montigo R520 Installation & Maintenance Manual

Installing the Fireplace:

Place the Fireplace on the platform and install the Vent pipe, and Power Vent module. Next, connect the Gas line, and provide a gas service
shut-off valve; according to local gas codes. Before fastening in place line up the front face of the fireplace (top and bottom Figure 4). then
secure in place with 1/4"bolts and washers to the platform.
2" Clearance
Figure 4. Fireplace installation, (Inlet Gas & Power Vent).
XG0771 - 150204.3
Installation
Intake / Exhaust
Vent Pipe (5"/10")
R520 Power Vent Indoor Gas Fireplace
1/2"
2" Clearance
Supply Gas
connection
Page 9