Digital Audio Using The Hdmi4/Arc Jack - Insignia NS-43DR710NA17 Roku TV User Manual

Digital audio using the HDMI4/ARC jack

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a soundbar, sound plays through your TV speakers and the external speakers or
soundbar.
On your TV
HDMI cable
connector
HDMI4/UHD/
ARC jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or soundbar is turned off.
2 Connect an HDMI cable (not provided) to the HDMI4/UHD/ARC jack on the side of your TV and to the HDMI IN jack
on the digital speaker system or soundbar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or soundbar.
5 To turn off your TV speakers, on the Home menu, press
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
6 To configure the HDMI4/UHD/ARC jack to output sound to an ARC device, on the Home menu, press
highlight Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then
press OK. Highlight HDMI ARC, then press OK to check the box.
30
ARC audio device
Soundbar
www.insigniaproducts.com
43"/50"/55" 4K / 2160p, 60Hz, LED Roku TV
Side of TV
or to highlight Settings, then press OK. Highlight
or to