NS-43DR710NA17/NS-50DR710NA17/NS-55DR710NA17
Connecting a network router
You can connect your TV to a network router using an Ethernet cable and the ETHERNET jack on the back of your TV.
On your TV
Ethernet
cable
connector
ETHERNET jack
1 Make sure that your TV's power cord is unplugged and the router is turned off.
2 Connect an Ethernet cable (not provided) to the ETHERNET jack on the back of your TV and to an Ethernet jack on
the router.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 During Guided Setup, select Wired (Ethernet) > Connect to wired network to use your wired connection to access
the Internet and your Roku account.
Back of TV
www.insigniaproducts.com
Network router
Ethernet cable
25