Moving The Picture On The Screen - Sharp LC-30AA1H Operation Manual

Useful adjustment settings

Moving the picture on the screen

You can move the picture around on the screen.
52
LC-37AA1H(E)-g 52
Press a/b/c/d to move an image on the screen to
the desired position. Press ENTER to return to the initial
image position.
NOTE
• While pressing a/b/c/d, an on-screen image,
"Adjusting Position" displays to the desired position.
• This setting cannot be stored. Once the System shuts
down or enters standby mode, the setting is erased. To
move the picture around the screen again, you must
perform the above procedure again.
• The image position setting using the steps on page 51
can be stored. Select either according to your objectives.
• "TV", "INPUT1", "INPUT2", "INPUT3" and "INPUT4" can
each adjust the image position setting on this page. The
same for WIDE modes.
• An on-screen image from a PC source cannot be moved
around.
• Even when the image fills the screen, its position can be
adjusted with this function.
03.11.6, 8:24 AM