Table of Contents
Advertisement
Basic adjustment settings
Auto installation
You can run auto installation, even after setting up the
preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Auto Installation", and
then press ENTER.
[ Setup ... Auto Installation ]
MENU
Setup
Auto Installation
Programme Setup
Child Lock
Position
Full Mode
Rotate
Language
• Full Mode is only displayed for LC-30AA1H.
LC-37AA1H(E)-c
Option
[Mode1]
[Normal]
[English]
25
4
If you already set the password for child lock,
enter it here. If not, enter the factory preset
password "1234".
• See page 64 for setting password.
–
Enter your 4-digit password with 0 - 9 on the
remote control unit.
5
Press c/d to select "Yes", and then press
ENTER.
Yes
6
Press a/b to select the desired language
listed on the screen, and then press ENTER.
After this setting, auto search starts with the
following order.
1 Automatic channel searching
2 Automatic channel labelling
3 Automatic channel sorting
You do not need to do anything during the
auto search. (Go to the next page.)
NOTE
• The illustrations and on-screen displays in this manual
are for explanation purposes and may vary slightly from
the actual operations.
03.11.6, 8:16 AM
–
–
–
No
25
Advertisement
Chapters
Table of Contents
