Husqvarna LZ 25 Operator's Manual page 57

6. Front Wheel Bearings
Lubricate with a grease gun, one zerk for each
set of wheel bearings, until the grease is forced
out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
7. Deck belt pulleys - Tunnel Deck Only
Lubricate with a grease gun two strokes.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, one zerk,
until the grease squeezes out.
Lubricate the lever latch run in in the lever.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
LUBRICATION
Lubricating the front wheels
Deck belt pulley
Lubricating the cutting height adjuster
8011-573
8011-461
8011-574
55
English-