Table of Contents
Advertisement
Symptom
The unit does not
respond (no power)
No Sound
Cell phone will not
charge
Noise or sound
distorted on FM
broadcast
Sound is distorted
Unit gets warm after
extended play at
high volume
TROUBLESHOOTING GUIDE
Possible Problem
The unit is disconnected from
the AC outlet.
The AC outlet has not power.
The unit is not linked with
Bluetooth enabled device.
The unit placement out of
range.
Volume set too low.
Cell phone is not installed
properly.
Cell phone is locked up or
frozen.
Cell
phone
battery
problem.
Station not tuned properly for
FM.
The FM wire antenna is not
fully extended.
Volume level is set too high.
Sound source is distorted.
This is normal.
E-13
Solution
Reconnect to the AC outlet.
Try the unit on another outlet.
Go
through
BLUETOOTH ENABLED DEVICE"
process to link the unit.
Relocate the unit within Bluetooth
operating range (30 Feet).
Press Volume + Button to turn the
sound level up.
Remove your cell phone from the
charging cord and check for
obstruction on the connectors.
Please make sure your cell phone
is
working
plugging into the unit. Please refer
has
to your cell phone manual for
details.
Retune the FM broadcast station.
Fully extend the FM wire antenna.
Decrease the volume.
If the cell phone original sound
source is of poor quality, distortion
and noise are easily noticed with
high-power
speakers.
different audio source such as a
music CD.
If you are using an external sound
source like older generation of
iPod, try reducing the output
volume on the device itself. Also
try turning bass boost OFF or
change the EQ setting.
Turn the unit off for a period of time
or lower volume.
"LISTENING
TO
properly
before
Try
a
Hide quick links:
Advertisement
Table of Contents
