Features And Functions - Honeywell hr960 Manual

FEATURES AND FUNCTIONS

1. REC(RECORD) button
Press to begin recording.
2. STOP/EJECT button
Press to discontinue all tape related
functions. Press to remove the cassette.
3. STAND BY/ON
(Press for on ; press again for off)
4. MENU button
Press to display current state on TV
screen, You can change its contents.
5. MOVE button
Press to move the cursor down on menu
screen or to operate tracking during
playback/ slow.
6. SELECT button
Press to select the cursor to change the
value to set or to operate tracking during
playback/slow.
7. CLEAR button
Press to delete the information stored on
screen display as Alarm recall, Power fail
and Timer program.
8. CLOCK/COUNTER/REMAIN button
Press to display the current time in initial
state. Press one time to convert into
counter mode which indicates the tape's
location. Press again to convert into
remain mode which indicates the tape's
remaining time.
9. RESET button
Press to initialize the unit.
10. ALARM ON/OFF button
Press to set Alarm mode on.
Press again for off.
11. REC LOCK ON/OFF button
Press for record lock on. Press again for
record lock off
12. SPEED(-) button
Press to select in good order like *L30H,
L18H, L6H during recording/ playback
FRONT VIEW
13. SPEED(+) button
Press to select in good order like *L6H,
L18H, L30H during recording/ playback
14. TIMER ON/OFF button
Press to select the timer program-on or
off. By setting timer on, a timer program,
is set to work.
15. SHARPNESS(-) button
Picture is smoothly expressed gradually
on the modes of PLAYBACK, SLOW,
STILL, CUE, REV.
16. SHARPNESS(+) button
Picture is minutely expressed gradually
on the modes of PLAYBACK, SLOW,
STILL, CUE, REV.
17. AUDIO ON/OFF button
Press to hear sound in *L6H, L18H,
L30H(linear mode).
Press again for time lapse play mode.
18. PLAY/REC CHECK button
Press to playback a previously recorded
tape.
Press this button during recording to
confirm the recording operation. It
playbacks the recording on screen for
seconds and returns to recording mode.
19. PAUSE/STILL button
When pressed during recording, tape
movement stops temporarily. Press REC
button to continue the recording.
When pressed during playback, tape
movement stops.
Press again to advance by still picture.
20. Shuttle Ring
Refer to page 28.
21. Jog Ring
Refer to page 28.
N O T E
*NTSC model: 960H, ..., L30H, L18H, L6H
PAL model: 960H, ..., L30H, L18H, 6H
English-5