Recording; Multicast; Configuration; Tampering Recognition And Motion Detectors - Bosch Dinion IP NWC-0495 Installation Manual

Dinion IP
| Installation Manual EN | 15

Recording

The NWC-0495 can be used with an iSCSI server connected via the network to
store long-term recordings.

Multicast

In suitably configured networks, the multicast function enables simultaneous, real
time transmission to multiple receivers. The prerequisite for this is that the UDP
and IGMP V2 protocols are implemented on the network.

Configuration

The camera can be configured using a browser on the local network (Intranet) or
from the Internet. Similarly, firmware updates and rapid loading of device
configurations are also possible. Configuration settings can be stored as files on a
computer and copied from one camera to another.

Tampering recognition and motion detectors

The NWC-0495 offers a wide range of configuration options for alarm signaling
in the event of tampering with the camera. An algorithm for detecting movement
in the video image is also part of the scope of delivery and can optionally be
extended to include special video analysis algorithms.

Snapshots

Individual video frames (snapshots) can be called up as JPEG images, stored on
the hard drive or displayed in a separate browser window.

Backup

The browser application Livepage has an icon for saving the video images
provided by the unit as a file on your computer's hard drive. Clicking this icon
stores the video sequences and they can be replayed with the MPEG viewer from
Bosch Security Systems included with the package.
Bosch Security Systems | 2006-05 | V2.0