Driver Assistance Systems; Rear Vision Camera (Rvc); System - Chevrolet 2016 Colorado Owner's Manual

238 Driving and Operating
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal.
Press .
Press the clutch pedal for
several seconds or shift the
transmission to N (Neutral).
To turn off cruise control,
press .
Erasing Speed Memory
The cruise control set speed is
erased from memory if
or if the ignition is turned off.
Driver Assistance
Systems
Rear Vision
Camera (RVC)
The camera(s) do not display
children, pedestrians, bicyclists,
crossing traffic, animals, or any
other object outside of the
cameras field of view, below the
bumper, or under the vehicle.
is pressed
Shown distances may be different
from actual distances. Do not
drive or park the vehicle using
only these camera(s). Always
check behind and around the
vehicle before driving. Failure to
use proper care may result in
injury, death, or vehicle damage.
If equipped, the RVC system is
designed to help the driver when
backing up by displaying a view of
the area behind the vehicle. When
the key is in ON/RUN and the driver
Warning
shifts the vehicle into R (Reverse),
the video image automatically
appears on the infotainment screen.
The infotainment screen goes to the
previous screen after approximately
four seconds once the vehicle is
shifted out of R (Reverse).
To see the previous screen sooner,
do one of the following:
Press a hard key on the
infotainment system.
Shift into P (Park).
The RVC will not work properly if
the tailgate is down. If the tailgate is
down, do not use this system.
Guidelines
The RVC system may have a
guideline overlay that can help the
driver align the vehicle when
backing into a parking spot.
To turn the guidelines on or off:
1. Shift into P (Park).
2. Press SETTINGS on the home
screen of the infotainment

system.

3. Select Rear Camera.