Chevrolet 2016 Colorado Owner's Manual page 81

80 Seats and Restraints
Crew Cab
1. When installing a rear-facing
child restraint, it may be
necessary to move the front
seat forward to properly install
per the child restraint
manufacturer instructions. See
Seat Adjustment 0 44 or Power
Seat Adjustment 0 44.
2. For rear outboard seating
positions, if the head restraint
interferes with the proper
installation of the child
restraint, the head restraint
may be removed. See Head
Restraint/Headrest Removal
and Reinstallation at the end
of this section.
3. If the child restraint
manufacturer's instructions
recommend that the top tether
be attached, attach the top
tether to the top tether
anchor (1). Refer to the child
restraint instructions and the
following steps:
3.1. Release and pull the rear
seatback forward to
access the top tether
anchors (1). See Rear
Seats (Crew Cab) 0 47.
3.2. Put the child restraint on
the seat.
3.3. Route the top tether
according to your child
restraint instructions and
the following instructions:
If the position you are
using does not have a
head restraint and you are
using a single tether, route
the tether over the
seatback.
If the position you are
using has a fixed head
restraint and you are
using a single tether, route
the tether around the
inboard or outboard side
of the head restraint.