Toyota 2001 4Runner Owner's Manual page 235

WWW.MANUALS.WS
—Headlights
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.
WWW.MANUALS.WS
'01 4Runner_U (L/O 0008)
2. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
2001 4RUNNER (OM35768U)
3. Install the rubber cover with the
"TOP" mark upward, and snuggle on
the boss. Insert the connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
279