Table of Contents
Advertisement
WWW.MANUALS.WS
—Removing towing hook
cover for emergency towing
(four–wheel drive models)
Towing hook
cover
Clip
Removing clip
Installing clip
WWW.MANUALS.WS
'01 4Runner_U (L/O 0008)
1. Use a Phillips–head screwdriver and
remove the clip.
2. Unhook the towing hook cover.
2001 4RUNNER (OM35768U)
—Emergency towing hook
precautions
"
Before emergency towing, check that
the hook is not broken or damaged and
that the installation bolts are not loose.
"
Fasten the towing cable or chain se-
curely to the hook.
"
Do not jerk the hook. Apply steady and
even force.
"
To avoid damaging the hook, do not
pull from the side or at a vertical
angle. Always pull straight ahead.
251
Advertisement
Chapters
Table of Contents
