Advertisement
The forecast station shows MIN/MAX temperatures with
time and date of occurrence.
Press the IN button to view indoor temperature
MIN/MAX readings.
Hold the IN button to reset indoor temperature readings to current.
Press the OUT button view outdoor temperature MIN/MAX readings.
Hold the OUT button to reset outdoor temperature readings to
current.
Outdoor Temperature Reception Icon/Channel Indicator
The outdoor temperature reception icon will flash every
second when searching for the sensor.
Once connected, will show for 3 seconds when outdoor
temperature update is received.
The channel indicator will show below the reception icon.
Press the CH button to view sensors on other channels.
Note: Channel 1 will not show if only one sensor is
connected.
1. Insert batteries into sensor 1
2. Insert batteries into the forecast station
3. When outdoor temperature appears, insert batteries into sensor 2
4. When channel 2 appears insert batteries into sensor 3
5. Keep the forecast station and all sensors together for 15 minutes.
WWVB Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The forecast station will search for 1 hour between midnight and 6am
until the WWVB time signal is received. After reception, the forecast
station will only search for the atomic signal after midnight.
WS-7014CH-IT
View/Reset MIN/MAX Values
Setup with Multiple Sensors
WWVB Radio-controlled Time
www.lacrossetechnology.com/support
IN
OUT
Outdoor
Reception
Icon
2
Outdoor
Channel
Icon
WWVB
ATOMIC
ICON
Page | 3
Advertisement
