Miele DA 1160 Operating And Installation Instructions page 23

^ Fix the mounting plates to the wall
using the plugs and screws supplied.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the rangehood.
Remove the halogen lamps. To do this:
^ Slightly loosen the lamp's fastening
screw.
^ Slide the screw and the lamp down.
^ Tighten the screw again.
^ Turn the lamp anti-clockwise and pull
it out.
Installation
23