Panasonic AJ-SDa755E Operating Instructions Manual page 47

CONTENTS
Setup menus
USER menu
<VIDEO>
No./Item
660 This selects whether or not to record the
UMID information on the tape.
UMID REC
0000 OFF :
UMID information is not recorded on the tape.
In addition, EE output signals are blanked.
0001 ON :
UMID information is recorded on the tape.
<Notes>
OIf SDTI/1394 has been selected as the input
signals using the INPUT SELECT button, the
UMID information on the input signals will be
recorded regardless of this menu's setting.
OIf THRU has been selected as the setup menu
item No. 106 (EE MODE SEL) setting, UMID
information of the EE output signals will be
blanked.
661 This selects the basic UMID information to be
recorded on the tape when ON has been
UMID GEN selected as the setup menu item No. 660
(UMID REC) setting.
0000 INT :
Newly created basic UMID information of this
unit is always recorded.
0001 EXT :
The basic UMID information of the input
signals is recorded.
Newly created basic UMID information of this
unit is recorded if there is no basic UMID
information on the input signals.
<Note>
The source pack (of the UMID information) of the
input signal will be recorded on the tape,
regardless of this menu's setting.
662 This sets the line on which the UMID
information is to be superimposed.
UMID POS
0000 BLANK
0001 8L
: :
0010 17L
: :
0015 22L
<Note>
The line selected for the setup menu item No.
501 (VITC POS-1) and No. 502 (VITC POS-2)
settings cannot be selected for this item.
The underlined items indicates the initial setting.
Description
47 (E)