Advertisement
5. Separate the front leg cover after removing
2 screws.
Screw
6. Unscrew 3 bolts tightening the hinge and also
unscrew 3 bolts on the bottom left side by the
front leg where removed hinge will be attached.
10 mm
7. Separate the hinge shaft by using hex wrench
first. Unscrew the bolt to remove the hinge riser
and switch the side of the hinge shaft and the
hinge riser.
Hinge shaft
Hinge riser
8 mm Bolt
8. Attach the hinge on the bottom left side of
the refrigerator where bolts were previously
removed in step 6.
Screw the bolts that were removed on the
bottom right side of the refrigerator for the
future usage.
Switch the the Leg from the left to right.
10 mm
DA68-03008C (EN)-05.indd 14
10 mm
10 mm
English - 14
9. Remove the screws on the bottom left and right
side of the refrigerator door.
Switch the side of the door stopper from right
to the left.
Hinge riser should be switched as well.
Hinge riser
10. R emove the wire cover on top of the refrigerator
door to switch the side of the wires.
11. R emove the hinge and the grommet from the
refrigerator door.
Detach the right side hinge cover and pull the
wires out of the hinge cover.
Hinge cover
Grommet
Be careful not to damage the electrical
wires when removing the hinge cover.
CAUTION
Hinge riser
2016. 3. 24.
11:01
Advertisement
