Advanced Information - Moultrie GAMESPY M100 Instructions Manual

Security Code - (default "00000") - This feature prevents
unauthorized use of the camera should it become lost or
stolen by requiring a 5 digit security code to be entered to
unlock the camera. The security code is 5 digits, each digit
being a number 0-9. The default code is "00000". Once the
code is changed from the default code, the camera will
prompt you to enter the correct code whenever:
• The camera is turned on
• The camera is woken up from sleep mode
• The camera is connected to USB
If the security code is the default number, then you do not need to
enter the code.
M100 GameSpy Digital Camera
VI

ADVANCED INFORMATION

VIEWING PICTURES ON COMPUTER VIA USB
1. Plug provided USB cable into the USB port on your Windows 7/Vista/XP
computer.
2. Plug other end of USB cable into the camera's USB port.
3. To access JPG pictures and AVI movie files, navigate to "My Computer" and
double click the "Moultrie CAM" drive. Picture files will be stored In the
DCIM/100_MDGC directory; video files are located in the DCIM directory.
4. To exit USB mode, follow Windows' instructions for properly disconnecting
a removable drive and then unplug
VIEWING PICTURES - TV OUT
1. To enter TV Out Mode, turn on the camera and place in the SETUP mode.
2. Plug RCA jack on provided TV Adapter Cable into a VIDEO IN port on a
TV or VCR.
3. Plug other end of TV Adapter Cable into the TV Out Jack. Pictures are now
presented on the TV.
4. To view pictures use the RIGHT or LEFT button to sequence to the
next/previous captured picture or video clip. The camera's menu display shows
the picture number being viewed.
5. To delete current picture or video, press the DOWN button.
6. To exit TV mode, unplug the TV Adapter Cable from the TV Out Jack and
TV or VCR.
Page 9 Page 10
MFH-M100
M100 GameSpy Digital Camera