Features - RIDGID R842301 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
Coupler ........................................................./4 in. Keyless
Motor .................................................................. 8 Volt DC
Switch ..........................................................Variable Speed
KNOW YOUR IMPACT DRIVER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BIT STORAGE
Bits provided with the impact driver can be placed in the
storage area, located on the base of the tool.
BLOWS PER MINUTE
This tool features an impact speed of 0-3,00 BPM (Blows
Per Minute). Blows Per Minute is the number of impacts
per minute.
COMPACT DESIGN
The compact design of the impact driver allows the operator
to get into tight areas.
COUPLER
Quickly and easily change bits without the need for tools.
coupler
Bit storAge
r84008 lithiuM-ioN
BAtterY pAcK
No Load Speed ............................................ 0-,400 r/min.
Blows Per Minute ...........................................0-3,00 BPM
Torque ................................................................ ,450 in.lb.
switch trigger
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your impact driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch trigger
for changing the direction of bit rotation. Setting the switch
trigger in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
ELECTRIC BRAKE
The electric brake will stop the bit rotation after the operator
releases the switch trigger.
MINIMUM REACTIVE TORqUE
This impact driver minimizes the amount of reactive torque
to the operator.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
7
directioN of
rotAtioN selector
(forwArd/reverse/
ceNter locK)
Fig.