Toro Groundsmaster 4000-D Service Manual page 152

Combination Manifold
RIGHT
FRONT
1. Combination manifold
2. Flange nut (3 used)
NOTE: The ports on the combination manifold are
marked for easy identification of components. Example:
P3 and P4 are the gear pump connection ports, S1 is the
location for solenoid valve S1 and OR6 is the location for
orifice OR6 (see Hydraulic Schematic in Chapter 10 --
Foldout Drawings to identify the function of the hydraulic
lines and cartridge valves at each port).
Hydraulic System
1
Figure 74
3. Flat washer (3 used)
4. Mount (3 used)
Page 4 - - 106
5
4
3
2
5. Spacer (3 used)
Groundsmaster 4000--D/4010--D