Power Windows; Window Opening And Closing; Auto Down Window - Hyundai 2010 ELANTRA TOURING Owner's Manual

Hide thumbs Also See for 2010 ELANTRA TOURING:
Table of Contents

Advertisement

Features of your vehicle
D080100BFD

Power windows

The ignition switch must be in the ON
position for power windows to operate.
Each door has a power window switch
that controls the door's window. The driv-
er has a power window lock switch which
can block the operation of rear passen-
ger windows.
The power windows can be operated for
approximately 30 seconds after the igni-
tion key is removed or turned to the ACC
or LOCK position. However, if the front
doors are opened, the power windows
cannot be operated even within the 30
seconds
period
after
ignition
removal.
✽ ✽ NOTICE
While driving with the rear windows
down or with the sunroof (if equipped)
in an open (or partially open) position,
your vehicle may demonstrate a wind
buffeting
or pulsation
noise is a normal occurrence and can be
reduced or eliminated by taking the fol-
lowing actions. If the noise occurs with
one or both of the rear windows down,
partially lower both front windows
approximately one inch. If you experi-
ence the noise with the sunroof open,
slightly reduce the size of the sunroof
opening.
4
14
D080101AUN

Window opening and closing

key
(if equipped)
The driver's door has a master power
window switch that controls all the win-
dows in the vehicle.
To open or close a window, press down
or pull up the front portion of the corre-
sponding switch to the first detent posi-
tion (5).
noise. This
OFD037030
D080102AUN
Auto down window (if equipped)
Depressing the power window switch
momentarily to the second detent posi-
tion (6) completely lowers the driver's
window even when the switch is
released. To stop the window at the
desired position while the window is in
operation, momentarily pull the switch in
the direction opposite of the window's
movement.
OFD037031

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents