Windshield Defrosting And Defogging; To Defog Inside Windshield; To Defrost Outside Windshield - Hyundai 2010 ELANTRA TOURING Owner's Manual

Features of your vehicle

WINDSHIELD DEFROSTING AND DEFOGGING

D250000AUN
WARNING
- Windshield
heating
Do not use the or
during cooling operation
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
or button to the position and
fan speed control knob or button to
a lower speed.
• For maximum defrosting, set the temper-
ature control to the extreme right/hot posi-
tion and the fan speed control to the high-
est speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode to
the floor-defrost position.
• Before driving, clear all snow and ice from
the windshield, rear window, outside rear
view mirrors, and all side windows.
• Clear all snow and ice from the hood and
air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up the inside of the
windshield.
4 82
position
in
Manual climate control system
D250101AFD-EU

To defog inside windshield

1. Select desired fan speed.
2. Select desired temperature.
3. Select the
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
If the air-conditioning and outside (fresh)
air position are not selected automatical-
ly, press the corresponding button manu-
ally.
OFD049115N
D250102AFD

To defrost outside windshield

1. Set the fan speed to the highest posi-
tion.
2. Set the temperature to the extreme hot
position.
or position.
3. Select the
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
OFD049116N
position.