Turn Signal Indicator Lights; High Beam Indicator; Engine Oil Pressure Warning - Hyundai 2010 ELANTRA TOURING Owner's Manual

Conditions Warning Pattern
Vehicle
Seat Belt Light-Blink
Speed
Unbuckled 6 seconds
Buckled 6 seconds
Below 3 mph
6 seconds
(5 km/h)
Buckled →
3 mph~6 mph
6 seconds
Unbuckled
Above 6 mph 6 sec. on / 24 sec. off
(10 km/h)
(11 times)
Above 6 mph
6 sec. on / 24 sec. off
(10 km/h)
(11 times)
↓
Unbuckled
Below 3 mph
Stop
(5 km/h)
If the driver's seat belt is buckled while
unbuckled, the seat belt warning light
and chime will stop immediately
D150305AFD

Turn signal indicator lights

Chime-
Sound
The blinking green arrows on the instru-
ment panel show the direction indicated
None
by the turn signals. If the arrow comes on
None
but does not blink, blinks more rapidly
than normal, or does not illuminate at all,
a malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.
This indicator also blinks when the haz-
ard warning switch is turned on.
↓
D150306AUN

High beam indicator

This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.
Features of your vehicle
D150307AFD
Engine oil pressure warn-
ing
This warning light indicates the engine oil
pressure is low.
If the warning light illuminates while driv-
ing:
1. Drive safely to the side of the road and
stop.
2. With the engine off, check the engine
oil level. If the level is low, add oil as
required.
If the warning light remains on after
adding oil or if oil is not available, call an
authorized HYUNDAI dealer.
CAUTION
If the engine is not stopped imme-
diately after the engine oil pressure
warning light is illuminated, severe
damage could result.
4 45