Replacement Of Audio Digital Amp Ic (Ic5000) - Panasonic SA-AKX50PH Service Manual

Step 4 Flip the CD Servo P.C.B.
Step 5 Detach 16P FPC at the connector (CN7001) on CD
Servo P.C.B.
9.26. Replacement of Audio Digital
Amp IC (IC5000)
• Refer to "Disassembly of D-Amp P.C.B.".
Step 1 Flip over D-Amp P.C.B..
Step 2 Desolder pins of the Audio Digital Amp IC (IC5000) on
the solder side of D-Amp P.C.B..
Step 3 Remove 1 screw.
Step 4 Remove TR Spring in the direction of arrow shown.
Step 5 Remove Audio Digital Amp IC (IC5000).
Caution: During replacement of the part, avoid touching
the heatsink, it may lead to injuries.
9.26.1. Assembly of Audio Digital Amp IC
(IC5000)
Step 1 Mount the Audio Digital Amp IC (IC5000) on to D-Amp
P.C.B..
Step 2 Screw back TR Spring to hold the Audio Digital Amp IC
(IC5000) onto the Heatsink.
Step 3 Solder the pins of Audio Digital Amp IC.
Step 4 Use a blower to remove the minute particles after the
screwing of TR Spring.
56