Disassembly Instructions; To Remove Upper Side Parts; To Remove The Main P.c.b - Technics SL-J11D Service Manual

• DISASSEMBLY INSTRUCTIONS
Ref. No.
1
How to remove upper side parts
Procedure
Cartridge setscrew
1
Plastic rivets
1. Open the dust cover.
2. Remove the 4 plastic rivets.
To remove the dust cover
~(J=-fi:*-(p-
IF-~· -· 1~------r-r-rh-1,,--,,,--rn\......c_-=:i
To remove the turntable platter
1. Remove the turntable mat and the
drive motor belt.
2. Lift the turntable platter.
To remove the record detecting lever
1. Remove the turntable platter.
2. Release the claw and remove the
record detecting lever.
Ref. No.
3
Procedure
2•3
How to remove the main P.C.B.
1. Pull off the power switch button.
2: Remove the 3 connectors (CN301-CN303) .
3. Remove the 4 setscrews.
4. Lift the main P.C.B. with the power switch rod.
Note:
When removing the power switch rod from the main P.C.B .. be sure to turn off the
power switch. Otherwise the power switch may be damaged.
A>
Power switch
Power switch rod
~
~
Power switch button
~
- 4 -
Ref. No.
4
H
To remove the
P.C.B . (Except f
1. Remove the
2. Slide up the
P.C.B. with t
To remove the s
1. Remove the
~
(0 - C)).
2. Litt the stator
To remove the s
P.C.B.
1. Remove the t
8
and remm
2. Remove the~
3.
Lift the selec1
Selector knob
Driver
....__,;