To Remove The Bottom Board; To Remove Lower Side Parts - Technics SL-J11D Service Manual

Push
<;:,f\ull out
To remove the cartridge
-1 .
Remove the cartridge setscrew.
-2. Pull out the cartridge.
• When removing the stylus, it is not
necessary to remove the cartridge.
-To remove the 45 r.p.m. adaptor
• Remove the turntable platter and
release the 2 claws.
- To remove the record detector
1.
Remove the turntable platter.
2. Remove the setscrew.
>w to remove lower side parts
rnchro-rec. jack
----tt-----~
1r (M, MC] areas)
9tscrew
O.
vnchro-rec. jack
e cover.
ator frame Ass'y
setscrews
frame Ass'y.
ilector switch
racket setscrew
9 the bracket.
:itscrews
(@, 0) .
::>r switch P.C.B.
Ref. No.
2
Procedure
2
To remove the front panel.
How to remove the bottom board
1. Remove the turntable platter.
2. Remove the 4 setscrews.
GI>
To remove the power
@
transformer.
~
1. Remove the 2 setscrews
(f) , @) .
2. Lift the power transformer.
To remove the turntable drive
motor.
1. Unsolder the 4 lead wires.
2. Lift the turntable drive motor.
To remove the fuse P.C.B.
(Except for [M) area)
• Remove the setscrew
41.
1.
Remove the power switch button.
2. Release the 9 claws.
3. Slide up the front panel.
-5 -
Pre
1
2
RE
Pro
4