Sfe (Special Feature Enablement) - Samsung CLX-9201 Service Manual

4.4.7. SFE (Special Feature Enablement)

Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or
dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
SFE menu description
•
Service Mode > SFE > Letterhead/Preprinted paper handle (001)
If this option is enabled, in case of printing in directional media (Letterhead/Preprinted), the device prints as the
same output direction regardless of simplex or duplex.
•
Service Mode > SFE > Mono Print only mode (002)
If this option is enabled, the device always prints output as mono about PC printing.
•
Service Mode > SFE > Copy Speed (004)
If this option is enabled, the device accelerates the scan speed of ADF copy by reducing scan resolution from 600 dpi
to 300 dpi.
•
Service Mode > SFE > Print Output (005)
If this option is enabled, the device provides the same output direction about Flatbed printing and ADF printing.
NOTE
Refer to the following table for SFE supported in each model.
SFE Code Title
001 Letterhead/Preprinted paper handle
002 Mono Print only mode
004 Copy Speed
005 Print Output
Copyright© 1995-2013 SAMSUNG. All rights reserved.
CLX-9201/ SCX-8123/
9251/ 9301 8128
(Polaris (Polaris
Color) Mono)
O O
O X
O O
O O
4. Troubleshooting
CLX-9252/ SCX-8230/
9352 8240
(Cosmos-R (Cosmos-R
Color) Mono)
O O
O X
O O
X X
CLX-8640/
8650
(Evergreen)
O
O
X
X
4-52