3. Disassembly and Reassembly
3.3.11. Fuser-Duct Fan
1. Remove the rear cover. (Refer to 3.3.2)
2. Unplug the connector. Remove 3 screws. And the
remove the Fuser-Duct.
3.3.12. Main board shield
1. Remove the rear cover. (Refer to 3.3.2)
2. Unplug all connectors on the main board.
3. Remove the main board shield after removing 4 screws.
3-24
3. Release the fan by separating the Fuser-Duct.
CAUTION
When assembling the new fan, be careful not to
change the fan direction. The label must be shown
on the outside.
Copyright© 1995-2013 SAMSUNG. All rights reserved.