Table of Contents
Advertisement
Figure 21
Configure port BB_Credit
Configure port NPIV
42
SAN140M Installation and Service Manual
2. Click OK to save and activate changes.
Basic information view
Perform this procedure to configure port receive BB_Credit.
1. Set all or a subset of user-specified ports offline
unblocking ports
on page 181).
2. Select Ports and RX BB_Credit from the Configure menu at any
view. The RX BB_Credit View displays.
3. Perform one of the following:
— To set all offline ports to default values, click Default.
— To set an offline port to a user-specified value, type the desired
value in the RX BB_Credit column.
4. Click OK to save and activate changes.
5. Set ports online
(Blocking and unblocking ports
NPIV allows multiple (up to 256) Fibre Channel addresses to be
assigned to a node (N_Port). The NPIV feature must be installed
(Blocking and
on page 181 ).
Advertisement
Chapters
Table of Contents
