Usb Terminal Connection; Speaker Terminal Connection - Panasonic H-55LFV60U Operating Instructions Manual

USB terminal connection

Connect the USB memory to use [USB media player].
(see page 85)
Also, power is supplied when a separately sold stick PC,
etc. are connected.
Note
●
A stick PC and connection cables are not supplied
with this unit.
Stick PC
USB cable (commercially available)
HDMI extension cable (commercially available)
Pin assignments and signal names for USB Terminal
Pin No.
+5 V DC
DATA -
DATA +
GND (Ground)
Power of up to 5V/1A can be supplied to an external
device when receiving images.
●
If the electric current exceeding the power supplying
capability is applied, the output is blocked, and the
following message is displayed.
[USB DC5V OUT overload. Please remove cable or
equipment, then turn the display off / on.]
In this case, remove the equipment and then turn the
power off/on using the remote control, etc.
26
English
1 2 3 4
Signal name
Note
● If the direct connection to this unit is not possible due
to the size of a stick PC, etc. use a commercially sold
extension cable.
● Depending on the type of a USB memory device,
it may come in contact with the periphery such
as a back cover, and cannot be attached. Use a
commercially sold extension cable, or use a small
type of a USB memory device connectable to this
unit.

Speaker terminal connection

Please use 8 Ω/10 W speaker.
Red
Black
While pressing the
lever, insert the core
wire.
Return the lever.