Connecting Wires To Terminals - Kenwood z838w Manual

Connecting Wires to Terminals

Non-fading left output (White) (Z838W/Z738)
Rear left output (White) (Z738 only)
Non-fading right output (Red) (Z838W/Z738)
Rear right output (Red) (Z738 only)
Rear left output (White)(Z838W only)
Rear right output (Red)(Z838W only)
KENWOOD disc changer input
Connector Function Guide
Pin Numbers for
Cable Color Functions
ISO Connectors
External Power
Connector
Yellow Battery
A–4
Power Control
A–5 Blue/White
Dimmer
A–6 Orange/White
Ignition (ACC)
A–7 Red
Earth (Ground)
A–8 Black
Connection
Speaker
Connector
Rear Right (+)
B–1 Purple
Rear Right (–)
B–2 Purple/Black
Front Right (+)
B–3
Gray
Front Right (–)
B–4 Gray/Black
Front Left (+)
B–5
White
Front Left (–)
B–6
White/Black
B–7 Rear Left (+)
Green
B–8 Rear Left (–)
Green/Black
Front left output (White)
Front right output (Red)
14
To connect the Disc changer, consult your
Disc changer manual. 15
Fuse (10A)
Wiring harness
(Accessory1) 16
Battery wire (Yellow) 6A
Ignition wire (Red)
A–7 Pin (Red) 8
A–4 Pin (Yellow) 9
Connector A
Connector B
— 45 —
To External Display/
Steering remote
FM/AM antenna input
Antenna Conversion Adaptor (ISO–JASO)
(Accessory3)
13
If no connections are made, do
not let the wire come out from
the tab. 18
EXT.
CONT
External amplifier control wire
(Pink / Black) 20
TEL MUTE
TEL mute wire (Brown)
7A
Power control/ Motor antenna
control wire (Blue/White) 20
P.CONT
ANT.CONT
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
30
3
Antenna Cord (ISO) 1
2
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function. 23
Connect to the terminal that is
grounded when either the
telephone rings or during
conversation. 21
To connect the KENWOOD
navigation system, consult
your navigation manual. 22
Connect either to the power
control terminal when using the
optional power amplifier, or to the
antenna control terminal in the
vehicle. 23