Cover Stitch - Janome CoverPro 1000CPX Instruction Manual

Janome CoverPro 1000CPX Instruction Manual
1
w
q
2
e
w
3
e
q
www.janomeflyer.com

Cover Stitch

This stitch is sewn with two needles and forms two
parallel rows of the straight stitch on the right side, widely
used on cuffs and stretch welts of T-shirts etc.
There are three types of cover stitch:
• Narrow-left (3 mm wide)
• Narrow-right (3 mm wide)
• Wide (6 mm wide).
z Narrow-left (3 mm wide)
Remove the right needle (see page 14). Thread the
looper, left and center needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
q Left needle
w Center needle
x Narrow-right (3 mm wide)
Remove the left needle (see page 14). Thread the
looper, right and center needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
w Center needle
e Right needle
c Wide (6 mm wide)
Remove the center needle (see page 14). Thread the
looper, right and left needles.
NOTE:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
q Left needle
e Right needle
30
1000CPX Owners Manual/ User Guide