Rear Panel - Philips DCR 2021 User Manual

DCR 2021_Premiere_indice 1b

1.2 Rear panel

Q W
1 5V (*):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 RF Out (*):
3 RF In (*):
4 TV (*):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 VCR/DVD (*):
6 (*):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 IR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 L/R (*):
The label showing the type and serial number is underneath the receiver.
SCART is also called Euroconnector or Peritel.
(1)
* Safety Extra Low Voltage
Note: if you consider using a video projector, refer to its user manual for the best
video format to feed it. If necessary, refer to paragraph System Settings to properly
set the TV/VCR SCART output.
8/03/06 16:29
E R
Socket used to connect the power cord.
RF output used to connect your receiver to a
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
VCR/TV set to watch analogue channels only, or
to connect another receiver.
RF input used to connect the antenna cord from
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
the wall socket. Refer to chapter Connecting
your Digital-Receiver.
SCART
SCART
. . . . . . . . . . . . . . . . . . . . . . .
recorder or DVD player/recorder.
Digital audio cinch output used to connect your
HiFi/audio receiver system.
Not active on this receiver system.
Left/Right analogue audio cinch outputs used to
. . . . . . . . . . . . . . . . . . . . . . . . . . .
connect your HiFi/audio receiver system.
Page 57
T
socket used to connect your TV set.
(1)
socket used to connect your video
(1)
Y
EN
U I
57