Lenovo ideapad 300S-11IBR Hardware Maintenance Manual page 61

Figure 13. Removal steps of Antenna, LCD cable, and integrated camera
(continued)
Release two antenna cables and one LCD cable from the cable guide.
Detach the adhesive of the antenna to remove them in the direction by
3
arrows .
When installing:
• Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make
sure that they are not subjected to any tension. Tension can cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the camera connector is attached fi rmly.
Lenovo ideapad 300S-11IBR
c
c
57