Lenovo ideapad 300S-11IBR Hardware Maintenance Manual page 43

Figure 3. Removal steps of hard disk drive (continued)
4
Remove four screws
d
Step Screw (quantity)
4
M3.0 × 3.0 mm, fl at-head, nylokcoated
(4) HDD to HDD BRKT
When installing: Make sure that the HDD connector is attached fi rmly.
Affi x the gasket over the hole as shown below.
Lenovo ideapad 300S-11IBR
and detach the metal frame from the hard disk drive.
d
d
Color Torque
Black 3.0~3.5 kgfcm
d
39