Sharp AR-FX7 Operation Manual page 21

TRANSMITTING A TWO-SIDED DOCUMENT
The RSPF can be used to automatically fax both sides of two-sided document by memory transmission.
1
Make sure that the machine is in fax
mode.
SCAN
DATA
LINE
FAX
DATA
CUSTOM SE
JOB STATUS
2
Place the original. (p.10)
3
Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO 8½x11R
ORIGINAL
the original size displayed in the key. If the original size
was not correctly detected, set the correct original
size. ("MANUALLY SETTING THE SCANNING SIZE"
(p.20))
4
Touch the [2-SIDED BOOKLET] key or
the [2-SIDED TABLET] key as
appropriate for the original you
loaded.
ORIGINAL SIZE
AUTO MANUAL
2-SIDED 2-SIDED
BOOKLET TABLET
ROTATE THE IMAGE
Booklets and tablets
Note
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
Two-sided scanning turns off after the document is stored in memory. Two-sided
scanning can be canceled by pressing the [CLEAR ALL] key (
When the [FAX] key light
is on, the machine is in
fax mode. If the light is
not on, press the [FAX]
key.
If the address directory
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen (p.7).
After touching the
[ORIGINAL] key, check
5
Select the [ROTATE THE IMAGE 90
DEGREES] checkbox.
MANUAL
ED 2-SIDED JOB
ET TABLET BUILD
ROTATE THE IMAGE 90 DEGREES
6
Touch the [OK] key.
SIZE OK
MANUAL
2-SIDED JOB
TABLET BUILD
OTATE THE IMAGE 90 DEGREES
A two-sided original icon appears next to the
[ORIGINAL] key.
STANDARD
RESOLUTION
AUTO 8½x11R
ORIGINAL
7
Continue from step 5 of "BASIC
PROCEDURE FOR SENDING FAXES"
(p.12).
).
BASIC OPERATIONS
This step is only
necessary if you placed
the original so that it is
oriented horizontally (the
top of the original is on
the right or left side).
Otherwise, go directly to
step 6.
You will return to the
initial screen.
Example: The icon that
appears when the
[2-SIDED BOOKLET]
key is touched.
Booklet Tablet
17
2