Setup Files - Yamaha PSR-S670 Reference Manual

SETUP FILES

For the items below, you can save your original settings to USER or USB drive as a single file for future recall.
1
Make all desired settings on the instrument.
2
Call up the operation display.
3
Use the [1 ]–[8 ] buttons to call up the relevant display for saving your data.
[1 ]/
SYSTEM SETUP
[2 ]
FILES
[3 ]/
MIDI SETUP
[4 ]
FILES
[5 ]/
USER EFFECT
[6 ]
FILES
[7 ]/
MUSIC FINDER
[8 ]
FILES
4
Use the TAB [E][F] buttons to select one of the tabs (USER or USB) to which your
settings will be saved.
5
Press the [6 ] (SAVE) button to save your file.
6
To recall your file, press the desired [F]–[I] button in the SETUP FILES display, then
select the desired file.
If you want to call up the factory default files, select the file in the PRESET tab.
When the file is selected, a message is displayed according to the content of the file. Press the desired
button.
Parameters set on the various displays, such as the UTILITY display
called up via the [FUNCTION] button, are handled as a single System
Setup file. Refer to the "Parameter Chart" in the Data List on the website
for details on which parameters belong to System Setup.
The MIDI settings including the MIDI Setups on the USER tab display are
handled as a single file.
The following data can be managed as a single file.
• User Effect types .......................................................................page 74
• User Master EQ types ..............................................................page 75
• User Master Compressor types
All the preset and created Records of the Music Finder are handled as a
single file.
.................................................page 76
PSR-S670 Reference Manual
10
95