Call Block - Panasonic KX-TGE260 Operating Instructions Manual

Programming
R To cancel a selected group, press the
same dial key again. "
3
MSAVEN a MOFFN
*1 KX-TGE270 series: page 3

Call block

This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (250 max.).
– "Block a single number": The unit
can reject calls from specific phone
numbers.
– "Block range of numbers": The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly
while caller information is being received. If
the caller's phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 47).
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
When a cellular phone is paired:
1
MCN CID
For assistance, please visit http://www.panasonic.com/help
46
TGE26x_27x(en)_0123_ver110.pdf
2
" disappears.
3
4
5
6
7
When a cellular phone is not paired:
1
2
*1
3
4
5
6
7
n By entering phone numbers:
1
2
3
4
5
Storing a range of numbers
1
2
3
46
MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press * (Edit)
repeatedly until the phone number is
shown in the 10-digit format.
MSAVEN
MbN: "Call block" a MSELECTN
MbN: "Yes" a MSELECTN
Edit the phone number if necessary (24
digits max.).
MSAVEN a MOFFN
MCN CID
MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: "Edit" a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 4.
MbN: "Save CID" a MSELECTN
MbN: "Call block" a MSELECTN
MbN: "Yes" a MSELECTN
Edit the phone number if necessary (24
digits max.).
MSAVEN a MOFFN
MMENUN#217
MbN: "Block a single number" a
MSELECTN
MMENUN a MbN: "Add" a MSELECTN
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
MSAVEN a MOFFN
MMENUN#217
MbN: "Block range of numbers" a
MSELECTN
MMENUN a MbN: "Add" a MSELECTN
2015/01/23 9:57:43