Selecting A Zone And Mode - Motorola II Operating Instructions Manual

3
1 2
AB C D E F
4 5 6
GHI JKL MNO
7 8 9
P R S TUV W X Y
0
HOME
1 2 3
AB C D E F
1 2 3
D E F
AB C
4 5 6
GHI JKL MNO
7 9
8
P R S TUV W X Y
0
HOME
16 Basic Radio Operation (cont.)

Selecting a Zone and Mode

A mode is a channel or talkgroup and all features
slaved to it. A zone is a grouping of modes that can
be selected either through the 3-position toggle
switch, or via the keypad. Before you send or receive,
set the radio to the desired zone and mode. To do
this:
1. Turn the radio on and press the right arrow key
( ) until "ZONE" appears on the display.
2. Press the key below "ZONE." The current zone
name will flash on the display; the mode name
will stay on solid.
3a. Press the right arrow key (
zone name appears on the display.
or
3b. Enter the number (1 through 16) of the desired
zone. The new zone name appears, flashing
(MTS 2000 III models only) .
) until the desired