Playlist And Scene Operations; Dividing Scenes - Canon Legria HF20 Instruction Manual

Playlist and Scene Operations

Dividing Scenes

You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
1 Open the original movies index screen.
You can select the original movies in the built-in memory or on
the memory card (
2 Select (
3 Press
FUNC.
• The scene selected will start playing back. Pause the playback at the
point where you want to divide the scene.
• You can use the following icons to bring the scene to a precise point.
/ : Search (fast playback) backward/forward.
/ : Skip to the beginning/end of the current scene.
/ : Frame backward/forward.
• Press
FUNC.
the scene.
4 Select (
5 Select ( ) [Yes] and press
The video from the division point to the end of the scene will appear as
a new scene in the index screen.
NOTES
• When advancing/reversing frames while dividing the scenes, the interval
will be longer than in regular frame advance/reverse.
• If the scene cannot be divided at the point where you paused the play-
back, advance/reverse a frame and then divide the scene.
• The following scenes cannot be divided:
- Scenes included in the scene pre-selection (marked with a
checkmark). Remove the selection mark in advance.
- Video snapshot scenes and other scenes that are too short (less than
3 seconds).
48).
, ) the scene you want to divide.
, select [ Divide] and press
or to stop the playback and cancel the division of
) the icon and press
(
to divide the scene.
.
30)
.
Video
79