Basic Playback; Playing Back The Video - Canon Legria HF20 Instruction Manual

Basic Playback

Playing Back the Video

1 Set the camera mode dial to
.
2 Press
• Even if the camcorder is off,
pressing
camcorder in playback mode.
• The index screen appears after a
few seconds.
3 Move ( ,
frame to the scene you want to
play back.
When you have recorded a large number of scenes, you can display
( ) a slidebar below the scene thumbnails and browse (
index pages; then, return (
4 Press
/
• Playback will start from the scene selected and continue until the end
of the last scene recorded.
• Press
/
• Press
Adjusting the Volume
1 During playback, open (
guide.
2 Select ( ) the top row (
3 Adjust (
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
46
Video
.
will turn on the
) the selection
or to begin the playback.
again to pause the playback.
to stop the playback and return to the index screen.
) the joystick
) the volume.
or
) to select the desired scene.
).
( 30)
) through