On-Screen Displays And Data Code - Canon Legria HF20 Instruction Manual

To fade in/out
Activate the selected fader in record pause mode (
to start recording with a fade in. Activate the selected
START/STOP
fader while recording (
pause the recording.
To activate an effect
mode: Activate the selected effect while recording or in record
pause mode.
mode: Activate the selected effect and then press
record the photo.
NOTES
• When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally.
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.

On-Screen Displays and Data Code

You can turn most on-screen displays on or off.
Repeatedly press
following sequence:
, mode:
• All displays on
• Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the histogram and information icons)
• All displays off
), then press
DISP. to turn the on-screen displays on/off in the
to fade out and
START/STOP
( 30)
), then press
to
PHOTO
73
Video