Installation Of The Lid Right Side Of The Casing Of The Engine - Honda 2010 CBX 250 Workshop Manual

CLUTCH/GEAR SELECTOR
Lift the arm limiter using a screwdriver. Install the ear of
guide and the plate of leva of changing gears.
NOTE
Align the hole in the bolt on the plate leva, with the ear
of guide of the drum of gears.
Apply locks chemistry to the thread of bolt to the plate of
leva of changing gears.
Install and tighten the bolt to the plate of leva of changing
gears.
TORQUE: 12 N.m (1,2 kg.m)
Install the lid right side of the casing of the engine (page
9-3).
INSTALLATION OF THE LID RIGHT SIDE
OF THE CASING OF THE ENGINE
Apply grease to lip of the new dust and install in the lid
right side of the casing of the engine.
Install the spring of return in the spindle of the arm of actuat-
ing the clutch. Then, install the spindle in the lid right side of
the casing of the engine.
NOTE
Set the spring of return in the lid right side of the
casing of the engine.
9-12
ARM LIMITER OF
CHANGING gears
GUIDE SPIKE
PLATE OF CAM gears
RETURN SPRING
SPINDLE ARM OF ACTUATING
THE CLUTCH
CBX250
Align
PLATE OF CAM gears
BOLT
TRABA
DUST COVER
NUEVO
GRASA