Feature Settings; Language Selection; Set Home Area Code - AT&T 957 User Manual

957_book_2ATT ill at margins

FEATURE SETTINGS

NOTE: You can exit feature setup at any time by holding N for
about two seconds, or by lifting the handset when there is no
incoming call. The order features appear in the menu changes after
initial setup. For complete feature setup, see pages 10 and 11.

Language Selection

You can select ENGLISH or ESPANOL (Spanish) as the language in which
your Caller ID information is displayed. When you first plug in the power
cord, the screen displays:
WHICH LANGUAGE?
1 Press CALL LIST + until the screen displays your language
selection.
2 Press N. You will see the Home Area Code setup screen.

Set Home Area Code

You must program your area code, so your phone can properly recognize
and dial calls.
If for calls within
your area code
1 Press N until the screen displays:
HOME AREA CODE?
2
Use the keypad to enter the three digits of your home area code.
3 Press N.
8
11/16/00
You dial
7 digits
(phone number, no area code)
10 digits
(area code + phone number)
— OR —
11 digits
(1 + area code + phone number)
HAC-___
1:39 PM Page 8
Enter in Step 2
Your home area code
0 0 0