Approval; Safety Regulations And Warnings - Siemens AR6181-MX Installation And Configuration Manual

1

Approval

2

Safety regulations and warnings

Siemens Building Technologies
Fire & Security Products
If used according to the instructions, this radio system meets the basic
requirements of article 3 and the remaining applicable conditions of the R&TTE
directive (1999/5/E6) of March 1999.
Equipment Classification according to ETSI EN 300 330: Class 2
FCC ID: PJMCPR02
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Unauthorized modifications may void the authority granted under Federal
Communications Commission Rules permitting the operation of this device.
The unit must only be used for the purpose intended by the manufacturer.
The installation instructions must be kept to hand and made available to every
user.
Unauthorized changes and the use of spare parts and accessories which are not
sold or recommended by the manufacturer of the unit could cause fire, electric
shock or injury. Therefore, such measures will result in a renunciation of liability
and the manufacturer will not accept any guarantee claims.
The manufacturer's guarantee terms in the version valid at the time of the sale
are applicable to the unit. No liability will be accepted for unsuitably or incorrectly
set parameters – whether automatic or manual – or for inappropriate use of the
unit.
All repairs must be carried out by the manufacturer.
The user is responsible for ensuring that the unit is set up and connected in
accordance with the recognized technical regulations in the country of
installation and any other guidelines valid in the relevant region.
Before opening the unit, always switch off the power supply and take
measurements to ensure that there is no power to the unit.
If an operating display goes out, this does not necessarily mean that the unit is
disconnected from the mains and has no power. If you are working on an open
device, remember that live components may be exposed.
Approval
5
12.2004