Siemens AR6181-MX Installation And Configuration Manual page 11

Siemens Building Technologies
Fire & Security Products
Installation of the Square reader without distance frame
For an installation without distance frame the gasket 1 has to be stuck on the back
of the housing base. The position of the slits in the gasket has to correspond to the
position of the screw holes in the housing.
Fig. 5 Installation with gasket 1
Installation of the Square housing with distance frame
For an installation with distance frame the gasket 1 is to be stuck on the back of
this distance frame. The position of the slits in the gasket has to correspond to the
position of the screw holes in the housing. The gasket 2 has to be stuck in the
distance frame.
Fig. 6 Installation with gasket 1 and 2
Gasket for the safety screw
Whether the reader will be mounted with or without distance frame, the gasket 3
has to be used in both cases. The accessory pack includes one gasket 3 as a
reserve.
Fig. 7 Use of gasket 3
Installation
11
12.2004