Polaris 3900 Sport Owner's Manual page 2

Page 2
Important Information
• Before installing the cleaner, make sure the pool filter is clean.
• New plumbing lines should be flushed out before installing the cleaner.
• The Polaris should not be used to remove plaster dust in new pools.
• Except when checking the wheel RPM, do not handle the Polaris while it is operating.
• Always remove the cleaner before swimmers enter the pool.
• Disconnect the cleaner before cleaning or backwashing the pool filter. After cleaning, let the
filtration system run for at least five (5) minutes before re-connecting the cleaner.
• Always remove the Polaris from the pool before super oxidation or chlorination treatments.
For customer service or support:
• Please mail Warranty Card immediately.
• For on-line support:
• To contact Polaris:
WARNING: USE OF THE POLARIS IN A VINYL LINER POOL
Certain vinyl liner patterns are particularly susceptible to rapid surface wear or pattern removal caused by objects coming into contact
with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool cleaners. Some
vinyl liner patterns can be seriously scratched or abraded simply by rubbing the surface with a pool brush. Ink from the pattern can
also rub off during the installation process or when it comes into contact with objects in the pool. Zodiac Pool Systems, Inc. is not
responsible for, and the Limited Warranty does not cover, pattern removal, abrasion or markings on vinyl liners.
www.polarispool.com
US
Customer Service
2620 Commerce Way
Vista, CA 92081-8438
1-800-822-7933
Canada
2115 South Service Road West, Unit 3
Oakville, Ontario • Canada L6L 5W2
1-888-647-4004