Solving Problems; Checking The Printer Status - Epson l805 User Manual

User's Guide

Solving Problems

Checking the Printer Status

Checking the Error Indicators on the Printer
When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen.
: On
: Off
: Flashing slowly
: Flashing fast
Light
Flashing alternately
Solving Problems
Situation
No paper is loaded or more than
one sheet has been fed at a time.
When printing on a CD/DVD, the
CD/DVD tray is not inserted or a
CD/DVD is not on the tray.
A paper jam has occurred.
The paper could not be ejected
because the size is too small.
The output tray is not in the
correct position.
The printer cover is open during
printing.
Initial ink charging is not
complete.
An ink pad is nearing or at the
end of its service life.
Solutions
Load paper and press the
Place a CD/DVD on the CD/DVD tray, insert the tray into
the printer, and then press the
Remove the paper and press the
Remove the paper. If you cannot remove it by hand, load
A4-size plain paper in the printer and press the
to eject the remaining paper.
To print on paper, set the output tray in the normal
position.
To print on a CD/DVD, set the output tray in the CD/DVD
position.
Close the printer cover.
See the Start Here poster to complete initial ink charging.
The ink pads need to be replaced.
Contact Epson or an authorised Epson service provider to
replace the ink pad*. It is not a user-serviceable part.
When a message saying that you can continue printing is
displayed on the computer, press the
continue printing. The lights stop flashing for the time
being, however, they will continue to flash at regular
intervals until the ink pad is replaced.
68
I
button.
I
button.
I
button.
I
button
I button to