Call Privacy; Do Not Disturb - AT&T 945 User Manual

w w w w w w w w w w w w
w w w w w w w w
❚ ❚ ❚
❚ ❚
60

Call Privacy

To ensure call privacy, this phone allows only one set at
a time to use a line.
Cancel Call Privacy
During the call, press the LINE button for the call.
You'll hear a short beep. Others can now join the call.
Restore Call Privacy
Press the LINE button again during the call. You'll hear
a double-beep. The other phones will be dropped from
the call.
NOTE: Call privacy is automatically restored when
you end the call.
NOTE: When a non-system phone answers a call,
any other system phone can pick up the call by pressing
the LINE button. Once a system phone picks up the
call, Call Privacy is activated and no other system
phones can listen to the call unless Call Privacy is
canceled, but non-system phones which share that
line can still join the call.

Do Not Disturb

When your phone is off-hook (i.e., you are on a call) you
will hear a low volume ring when you receive an intercom
call. In order to prevent even this audible signal, activate
the Do Not Disturb feature. When you activate this
feature you will not hear paging tones, voice paging, or
incoming call rings. Instead, the LINE light flashes and the
INTERCOM light goes on to signal an incoming call or
page. If you receive an intercom call, the INTERCOM light
flashes, and the number of the intercom extension calling
you appears on the display.
Press N to prevent interruptions. The DND
1
light goes on and the screen display includes
Press N again to resume normal call alerts.
2
The DND light goes off and the screen no
longer shows
When this feature is activated, callers from within your
phone system will hear a short repeating tone (like a fast
busy signal).
.
.