Table of Contents
Advertisement
Installation
Wall installation
1.
Install the wall bracket to the lower portion on the bottom of
the telephone base. Plug the tabs on the bracket into the slots
on the telephone base until they click into place.
2.
Install batteries to provide power for the AUDIO ASSIST,
MUTE and
the cover. Install three new alkaline AA batteries (not
included). Make sure to follow the polarity guide in the battery
compartment. Replace the cover.
NOTE: The batteries are needed for the AUDIO ASSIST, MUTE and
lights to work. Replace the batteries when the light is dim or unlit in
a dark room. Replace the batteries only with three new alkaline AA
batteries.
lights. Press the battery cover tabs and remove
5
Advertisement
Table of Contents
